TOPDON Diagnostic Tool

Keeping your MDCI updated ensures the best performance and stable DOIP communication when using the TOPDON Phoenix Smart or Phoenix Max . Follow the simple steps below to complete the update process smoothly. Step 1: Connect the MDCI to Power & Internet For the fastest and most stable update process, it is recommended to connect the MDCI using: A power supply An Ethernet cable You can also use Wi-Fi if Ethernet is unavailable. Connect to Wi-Fi Tap the gear icon in the top-right corner, then select [WLAN] and enter your Wi-Fi network information. Step 2: Check for Firmware Updates Once connected to the internet, the MDCI will automatically check for the latest software and firmware updates. Allow the update process to complete without interruption. Step 3: Reboot the MDCI After all updates are finished: 1. Disconnect the power supply cable 2. Power the MDCI back on 3. Let the device reconnect to the internet and check for updates again Some updates are installed sequentially, so mu...

  Before testing batteries, you must establish a connection between TOPDON ONE Plus and the BTMobile ProS (the BTMobile ProS is included with the purchase of the ONE Plus). How to Connect the BTMobile ProS to the ONE Plus? The BTMobile ProS can be connected to the tablet exclusively via Bluetooth. 1. Connect the red clamp of the BTMobile ProS to the positive battery terminal and the black clamp to the negative terminal. Once a secure connection is established, the green indicator light on the BTMobile ProS will turn on. 2. Tap [Tester] from the main screen of the ONE Plus tablet . 3. Tap [Bluetooth not connected] to access the list of Bluetooth devices. 4. Tap [BTMobile ProS] to establish the Bluetooth connection. 5. Once the Bluetooth connection is established, the app will automatically redirect you to the battery testing interface, and the icon will turn green. Finally, you can proceed with the battery, cranking, charging, and system tests by following the on-screen inst...