TOPDON Diagnostic Tool

This guide explains the basic setup requirements for using the TOPDON RLink Lite for remote programming services. Basic Requirements Before starting, prepare the following: 1. A programming power supply, such as TOPDON T120A or T90000 2. RLink Lite connected to an Ethernet port on your router or network switch 3. RLink Lite connected securely to the vehicle's OBD2 port Step 1: Set Up the Programming Power Supply Connect the programming power supply cables directly to the vehicle battery. A programming power supply, such as the T120A or T90000, is required during vehicle programming. Before programming, consult the vehicle manufacturer's service information and TSBs for the recommended voltage and current settings. Set the T120A or T90000 to Supply Mode, then adjust the voltage and current according to the manufacturer's specifications. If no specific settings are provided, use: Voltage: 13.6V Maximum Current: 120A Start the power supply and keep it running throughout the...

This guide explains how to use the TOPDON JS3000 Jump Starter to safely jump-start a 12V vehicle. Important: Before attempting to jump-start the vehicle, turn off all power loads, including the headlights, radio, air conditioning, and other electrical accessories. Step 1: Connect the Battery Clamps Plug the blue end of the battery clamps into the jump starter socket. Step 2: Connect the Clamps to the Vehicle Battery Connect the other end of the battery clamps to the vehicle battery: Red clamp → Positive (+) terminal Black clamp → Negative (-) terminal Make sure the clamps are securely connected to the correct terminals. Step 3: Check the Indicators Press the Power Button once to turn on the jump starter. The Battery Level Indicator will light up, indicating that the JS3000 is ready for jump-starting. The Status Indicator will turn green when the vehicle battery voltage is normal, and the jump starter is ready to start the vehicle. Note If the Status Indicator does not turn on, press ...